Mohammad Mazloum-Ardakani; Hamed Arabi; Zahra Alizadeh; Mahnoosh Haghshenas; Fatemeh Farbod; Sahar Saadat HosseiniKhah; Bibifatemeh Mirjalili
Abstract
In this research, a novel modified glassy carbon electrode (GCE) was successfully fabricated with a tri-component nanocomposite consisting of 5-(3,4-dihydroxyphenyl)8,8-dimethyl-2-(methyl thio)-7,8,9,10-tetrahydropyrimido [4,5-b]quinolone-4,6(3H,5H)-dione (PQ23) and Nitrogen-doped reduced graphene oxide ...
Read More
In this research, a novel modified glassy carbon electrode (GCE) was successfully fabricated with a tri-component nanocomposite consisting of 5-(3,4-dihydroxyphenyl)8,8-dimethyl-2-(methyl thio)-7,8,9,10-tetrahydropyrimido [4,5-b]quinolone-4,6(3H,5H)-dione (PQ23) and Nitrogen-doped reduced graphene oxide aerogel/molybdenum oxide nanorods (PQ23/N-doped-rGO/MoO2 /GCE) as sensing platform toward hydrazine (HDZ). The nanocomposite is characterized by MAP analysis, X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS). Through electrochemical investigations, the electron transfer coefficient between PQ23 and the N-doped-rGO/MoO2 /GCE (glassy carbon electrode which was modified with reduce graphene oxide decorated by molybdenum oxide nanorods) and the apparent charge transfer rate constant, ks, and diffusion coefficient (D) were calculated. Electrochemical behavior and electrocatalytic activity of the nanocomposite modified GCE were studied by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and differential pulse voltammetry (DPV). Under the optimum experimental condition, the designed sensor exhibited high sensitivity and suitable selectivity for hydrazine oxidation, enabling the detection of hydrazine with a linear range of 25.0-1000.0 µM and a good detection limit (3σ) was 4.2 µM. The designed electrochemical sensor shows good repeatability, reproducibility, and acceptable stability with an RSD less than 3.2%.
Mohammad Mazloum-Ardakani; Fatemeh Jokar; Hamideh Mohammadian-Sarcheshmeh; Bi Bi Fatemeh Mirjalili; Sahar Saadat Hosseinikhah
Abstract
Recently, different significant efforts have been made to fabricate an effectively modified electrode for replying to the growing requests for enhanced performance electrodes for electrochemical sensors. Herein, we introduced an organic material along with a composite of the zinc sulfide (ZnS) particles ...
Read More
Recently, different significant efforts have been made to fabricate an effectively modified electrode for replying to the growing requests for enhanced performance electrodes for electrochemical sensors. Herein, we introduced an organic material along with a composite of the zinc sulfide (ZnS) particles distributed in the substrate of carbon nanotubes (CNTs)/reduced graphene oxide (RGO) nanosheets by using an inexpensive, simple, and one-step fabrication method, as an effectively modified electrode for the determination of hydrazine as an analyte. This electrode represents a great electrochemical performance with a large linear range (0.01 μM-60.0 μM) and a proper limit of detection value (0.006 µM) for determination of hydrazine. Good recovery percentage values for the proposed sensor confirm its excellent ability to measure hydrazine.
Ghasem Karim-Nezhad; Sara Pashazadeh; Samira Honarmand
Abstract
In this study, a novel and convenient electrochemical sensor was fabricated by using dripping well-dispersed graphene oxide nanosheets, electropolymerization of poly glycine (p-Gly) and in situ plating of metallic copper nanoparticle film methods, successively. This sensor was further employed to investigate ...
Read More
In this study, a novel and convenient electrochemical sensor was fabricated by using dripping well-dispersed graphene oxide nanosheets, electropolymerization of poly glycine (p-Gly) and in situ plating of metallic copper nanoparticle film methods, successively. This sensor was further employed to investigate the electrochemical behavior of hydrazine. Scanning electron microscopy and energy dispersive X-ray spectrometry were used for the characterization of the prepared film. Anodic peak potential of hydrazine oxidation at the surface of modified electrode shifts by about 150 mV toward negative values compared with that on the bare electrode. The kinetic parameters such as the electron transfer coefficient (α) and charge transfer rate constant (k) for the oxidation of hydrazine was determined utilizing cyclic voltammetry (CV). The diffusion coefficient (D) of hydrazine was also estimated using chronoamperometry. The dynamic detection range of this sensor to hydrazine was 5- 60 and 80- 150 µM at the modified electrode surface using an amperometric method. The detection limit and quantitation are 5.33 µM and 17.77 µM, respectively. A new voltammetric method for determination of hydrazine was erected and shows good sensitivity and selectivity, wider linear relationship, very easy surface update and good stability.
Mohammad Mazloum-Ardakani; Zahra Alizadeh; Laleh Hosseinzadeh; Bibifatemeh Mirjalili; Naeimeh Salehi
Abstract
In this work, we synthesis and application of functionalized carbon nanotubes (CNTs) In this work, we synthesis and application of functionalized carbon nanotubes (CNTs) with6-amino-4-(3,4-dihydroxyphenyl)-3-methyl-1,4-dihydropyrano[2,3-c]pyrazole-5 carbonitrile (pyrazole derivative (APC)) as sensing ...
Read More
In this work, we synthesis and application of functionalized carbon nanotubes (CNTs) In this work, we synthesis and application of functionalized carbon nanotubes (CNTs) with6-amino-4-(3,4-dihydroxyphenyl)-3-methyl-1,4-dihydropyrano[2,3-c]pyrazole-5 carbonitrile (pyrazole derivative (APC)) as sensing platform toward hydrazine (HZ). Electrochemical properties of functionalized carbon nanotubes composite (APC-CNT) were investigated by cyclic voltammetry, chronoamperometry and differential pulse voltammetry techniques. It was found that the APC-CNT composite exhibited a pair of redox peaks, which is due to the electron transfer between the APC and the glassy carbon electrode. The electrocatalytic properties of the APC-CNT composite for HZ oxidation was remarkably increased as compared to only CNTs. The kinetic parameters of the APC-CNT composite in the presence and absence of HZ was studied by electrochemical methods. The APC-CNT modified electrode revealed an excellent voltammetric response to oxidation of HZ with a wide linear range from 0.01 μM to 120.0 µM and limit of detection of 8.6 nM. Also, APC-CNT modified electrode shows high selectivity, good stability, reproducibility with a RSD less than 2.11%.