@article { author = {Karami, Hassan and Goli, Fariba}, title = {Application of Electrochemically Synthesized Magnetite, Hematite, Iron Nanocomposite as a New Sorbent For The Removal of Lead Ions From Water}, journal = {Iranian Journal of Analytical Chemistry}, volume = {3}, number = {1}, pages = {55-62}, year = {2015}, publisher = {Payame Noor University, Iran}, issn = {2383-2207}, eissn = {2538-5054}, doi = {}, abstract = {Water pollution by heavy metal ions such as Pb occur globally. The conventional methods for the heavy metal ions removal from the water include electrochemical and chemical precipitations, ion exchange, reverse osmosis and sorption. Among the above mentioned different methods, sorption of heavy metal ions on the surface of solid nanomaterials is one of the most recommended and interest methods. Sorption is attractive due to its merits of efficiency, cheap and simple operation. In this study, hematite/magnetite/iron nanocomposite (MHINC) is synthesized by the low voltage electrical arc method in the presence of 1.2 Tesla external magnetic fields. Scanning electron microscopy and transmission electron microscopy show that the synthesized MHINC includes uniform nanoparticles with 7 nm average diameters. The prepared MHINC is used as a new sorbent to remove heavy metal ions from polluted waters. Experimental data shows that the sorption of lead ions on the surface of MHINC is acceptably fitted to the Langmuir isotherm. Based on the experimental data, a maximum sorption capacity of 86 mg g-1 is achieved for the sorption of lead ions on the surface of MHINC. The experimental optimum conditions for the lead ion removal includes pH=5, 25 ml sample volume, 25 mg sorbet and 25 min mixing time in the room temperature. Desorption studies showed the adsorbed lead ions on MHINC surface can be done by using 1ml acidic solution containing 3 M HCl and 2 M HNO3.}, keywords = {Magnetite, Hematite, Iron Nanocomposite,Electrical Arc,Magnetic field,Ion Removal,Heavy Metal Ions}, title_fa = {کاربرد نانوکامپوزیت مگنتیت، هماتیت، آهن سنتز شده به روش الکتروشیمیایی به عنوان یک جاذب جدید برای حذف یون های سرب از آب}, abstract_fa = {آلودگی آب توسط یون   های فلزات سنگین نظیر سرب به صورت جهانی در حال وقوع است. روش های معمولی حذف   یون های فلزات سنگین از آب شامل روش های رسوبدهی شیمیایی و الکتروشیمیایی،   مبادله یون، اسمز معکوس و جذب می باشد. بین روش های ذکر شده فوق، جذب سطحی یون   های فلزات سنگین روی نانومواد جامد یکی از روش های جالب و توصیه شده می باشد.   جذب سطحی به خاطر کارایی خوب، سهولت اجرا و ارزان قیمت بودن مورد توجه قرار   گرفته است. در این مطالعه نانوکامپوزیت مگنتیت/هماتیت/آهن (MHINC) به روش تخلیه قوس الکتریکی کم ولتاژ در حضور میدان مغنتاطیسی   خارجی با قدرت 2/1 تسلا سنتز شد. مطالعه تصاویر میکروسکوپ های الکترونی روبشی و   عبوری نشان داد که نانوکامپوزیت سنتز شده شامل نانوذرات یکنواختی با قطر میانگین   7 نانومتر می باشند. نانوکامپوزیت تهیه شده به عنوان جاذب جدید برای حذف یون های   فلزات سنگین از آب های آلوده استفاده شد. داده های تجربی نشان می دهند که جذب   یون های سرب بر روی MHINC به طور قابل قبولی با ایزوترم لانگمویر   سازگار است. بر این اساس، ماکزیمم ظرفیت جذب یون سرب بر روی نانوکامپوزیت سنتز   شده mg g-1  86 بدست آمد. شرایط تجربی بهینه برای حذف یون های فلزات   سنگین به ویژه یون سرب شامل 5 =pH، حجم نمونه 25 میلی لیتر، وزن جاذب 25   میلی گرم، زمان مخلوط کردن 25 دقیقه و دما برابر دمای اتاق می باشد. مطالعات   واجذب یون سرب از روی نانوجاذب نشان داد که محلول اسیدی شامل اسیدکلریدریک 3   مولار و اسید نیتریک 2 مولار می تواند به عنوان شوینده مناسب برای واجذب یون های   سرب استفاده شود.}, keywords_fa = {نانو کامپوزیت مگنتیت,هماتیت,آهن؛ قوس الکتریکی؛ میدان مغناطیسی؛ حذف یون؛ یون های فلزات سنگین}, url = {https://ijac.journals.pnu.ac.ir/article_2559.html}, eprint = {https://ijac.journals.pnu.ac.ir/article_2559_084eadbec35d7857ccc8b968b3b776e2.pdf} }